Analisa Rangkaian Active High Pass Filter Orde 1 dan Orde 2 Topology Sallenkey

Authors

  • Ahmad Taking Jurusan Teknik Elektro, Fakultas Teknik Universitas Borneo Tarakan
  • Mulyadi Mulyadi Jurusan Teknik Elektro, Fakultas Teknik, Universitas Borneo Tarakan

DOI:

https://doi.org/10.30649/je.v7i2.161

Keywords:

RC Circuit, First-Order High-Pass Filter, Second-Order High-Pass Filter, Sallen-Key Topology

Abstract

A filter is defined as an electrical circuit or network designed to pass or direct alternating current signals generated at certain frequencies while blocking or attenuating all alternating current signals generated at other frequencies. Filters can be classified as analog or digital, passive or active, and audio frequency (AF) or radio frequency (RF) filters. Analog filters are designed to process analog signals, whereas digital filters process analog signals using digital techniques. Depending on the type of elements used in the circuit, filters are categorized into active filters and passive filters. Passive elements include resistors, capacitors, and inductors. Active filters are equipped with transistors or operational amplifiers (op-amps) in addition to resistors and capacitors. The type of element used is determined by the operating frequency range of the circuit. For example, RC filters are generally used for audio or low-frequency operations. In the design of a high-pass filter system, the Sallen-Key topology of first-order and second-order configurations is used, which functions as a building block for implementing higher-order active filters

References

S. Sedra and K. C. Smith, Microelectronic Circuits, 7th ed. New York, NY, USA: Oxford University Press, 2015.

S. Franco, Design with Operational Amplifiers and Analog Integrated Circuits, 4th ed. New York, NY, USA: McGraw-Hill, 2014.

R. P. Sallen and E. L. Key, “A Practical Method of Designing RC Active Filters,” IRE Transactions on Circuit Theory, vol. 2, no. 1, pp. 74–85, Mar. 1955.

L. P. Huelsman and P. E. Allen, Introduction to the Theory and Design of Active Filters. New York, NY, USA: McGraw-Hill, 1980.

J. Karki, “Active Low-Pass Filter Design,” Texas Instruments Application Report, 2000.

K. Chaitra and N. Rao, “Design and Analysis of Active High Pass Filter Using Operational Amplifier,” International Journal of Engineering Research and Technology, vol. 6, no. 5, pp. 112–116, 2017.

R. Singh and V. Sharma, “Comparative Analysis of First Order and Second Order Active Filters,” International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, vol. 8, no. 4, pp. 2150–2156, 2019.

A. Antoniou, Digital Signal Processing: Signals, Systems, and Filters. New York, NY, USA: McGraw-Hill, 2006.

P. Horowitz and W. Hill, The Art of Electronics, 3rd ed. Cambridge, U.K.: Cambridge University Press, 2015.

P. Maheshwari and S. Anand, “Performance Analysis of Sallen-Key Active Filters Using Different RC Parameters,” International Journal of Electronics and Communication Engineering, vol. 9, no. 2, pp. 45–51, 2021.

Downloads

Published

2026-05-20

How to Cite

Taking, A., & Mulyadi, M. (2026). Analisa Rangkaian Active High Pass Filter Orde 1 dan Orde 2 Topology Sallenkey. J-Eltrik, 7(2), 68–77. https://doi.org/10.30649/je.v7i2.161

Issue

Section

Articles