Rancang Bangun Miniatur Prototype Aircraft Towing Tractor (ATT) berbasis Arduino menggunakan Sensor Garis
DOI:
https://doi.org/10.30649/je.v7i1.157Keywords:
Aircraft towing tractor, ground handling, apron, taxiway, airsideAbstract
An airport is a complex consisting of the landside and the airside. The airside is a crucial part of airport operations because it encompasses ground handling activities. Ground handling activities are primarily carried out on the apron. Aircraft towing tractors (ATTs), in particular, are vital equipment for aircraft operations in the hangar and on the apron. ATTs are used to tow or push aircraft while on the ground. The majority of these vehicles are still operated by humans. Furthermore, those operating ATTs must have a special permit. In reality, very few people have the permit to operate ATTs, leading to working hours exceeding the standard 8-hour workday. Based on the description, the problem in this research is how to reduce the workload of ATT operators due to the limited number of licensed operators so that it can reduce the occurrence of work accidents due to fatigue in operators. In addition, this research aims to reduce the workload of ATT operators due to the limited number of licensed operators by creating an Arduino-based ATT prototype that can run automatically according to a predetermined path. This tool will function as one of the devices that work in the apron area which is used to push the aircraft from the apron to the taxiway when taking off. The results of the study obtained the maximum load that can be pushed by this tool is 3 Kg. Meanwhile, for testing line sensors and others, it produces very good accuracy, reaching 100%.
References
Erlangga W. W. dan Raden F. H. 2023. Analisis Kebutuhan Alat Aircraft Towing Tractor di Bandar Udara Fatmawati Soekarno Bengkulu. JAMPARING: Jurnal Akuntansi Manajemen Pariwisata dan Pembelajaran Konseling. Vol. 1, No. 2.
Mustika S. dan Oce P. 2018. Kajian Ground Support Equipment (GSE) Motorized PT. Gapura Angkasa Cabang Soekarno Hatta. Jurnal Manajemen Bisnis Transportasi Dan Logistik. Vol. 4, No. 2.
Faza Khoirunnisa. 2023. Analisis Keteraturan Posisi Peralatan Pendukung Pesawat Dalam Keselamatan Penerbangan Di Sisi Udara Bandar Udara Internasional Soekarno-Hatta. [Tugas Akhir]. Palembang: Politeknik Penerbangan Palembang.
Sentot Subandono. 2012. Analisis Resiko Kecelakaan Pada Kegiatan Pelayanan Sisi Udara Pesawat Udara Di Bandara Soekarno-Hatta. [Tesis]. Depok: Universitas Indonesia.
Osef A. F., Rahmat S., dan Belyamin. 2022. Evaluasi Serviceability Aircraft Towing Tractor Wide (ATW) di PT XYZ. Prosiding Seminar Nasional Teknik Mesin Politeknik Negeri Jakarta. Vol. 12, No. 2.
Rahmat P. A. W. Wawancara Pribadi. Surabaya. 14 September 2025.
Juarni L. B. dan Aditya D. 2025. Pengaruh Kepatuhan SOP terhadap Kinerja Ground Handling dalam Pengoperasian GSE di Bandar Udara Sam Ratulangi Manado. Jurnal Manajemen Bisnis Digital Terkini. Vol. 2, No. 3.
Joko S., Suryadhi dan Muhammad T. 2024. Implementasi Kecerdasan Buatan Logika Fuzzy Pada Sistem Computer Vision Untuk Proses Deteksi Ukuran Ikan. Seminar Nasional Fortei7. Vol. 6, No. 1.
Aditya R., M. Taufiqurrohman dan Joko S. 2021. Rancang Bangun Penentuan Posisi Sepak Bola Beroda Menggunakan Metode Odometry Dan Kontrol PID (Proportional Integral Derivative). Jurnal Borneo Informatika & Teknik Komputer. Vol. 1, No. 1.
Safriudin R. 2020. Navigasi Mobile Robot Untuk Mencapai Docking Station Dalam Proses Autodocking. J-Eltrik. Vol. 2, No. 1.
Azriel S. H., Muh. Taufiqurrohman dan Safriudin R. 2025. PID Implementation for Depth Control and Navigation of Underwater Robots. Journal of Electrical and Electronic Engineering-UMSIDA. Vol. 9, No. 1.
Joko S., Suryadhi dan Eki A. 2023. Penerapan Metode Fuzzy Logic-PID Sebagai Kontrol Gerak Robot Berkaki Enam (Hexapod). Proceedings Series on Social Sciences & Humanities, Prosiding Seminar Nasional Teknik (SENATEK). Vol. 6.
